Mopar Parts and Accessories in Fontana: Lift Kits, Bed Covers, and Trail Gear

Genuine Mopar parts are engineered for one thing your aftermarket options can’t promise — a factory part number matched to your exact vehicle. That matters more on off-road hardware than almost anywhere else, because the same accessory that bolts on cleanly to one Ram 1500 won’t fit the truck parked next to it.

What this guide covers:

• Lift kits — part numbers by powertrain for Wrangler, Gladiator, and Ram 1500
• Bed covers — the full Ram 1500 tonneau lineup by bed configuration
• Trail gear — rock rails, skid plates, winches, and LED lighting
• The fitment restrictions that rule specific parts out of specific trucks

Mopar Lift Kits for Jeep Wrangler, Gladiator, and Ram 1500

Mopar’s Jeep Performance Parts (JPP) 2-inch lift kits are developed by Jeep brand engineers and off-road enthusiasts to fit larger tires and add ground clearance while keeping factory ride and handling characteristics intact. Ram 1500 uses a separate kit with a different design.

Two Shock Generations, Two Different Kits

	Current Generation	Earlier Generation
Shock	Bilstein 46mm monotube with remote reservoirs	Fox aluminum-body monotube
Model years cataloged	Current Wrangler (JL) and Gladiator (JT)	2010–2023 Wrangler and Gladiator
Valving	Self-adjusting deflective-disc valve reacts instantly to surface changes	Tuned for larger off-road tires
Heat management	Remote reservoirs increase oil capacity for greater heat dissipation	Aluminum body for cooler operation
Notable detail	Swivel banjo fitting allows 360-degree hose rotation, protecting the reservoir line from contact	Stiffer front bushing for more control with larger tires

Both generations share three characteristics worth knowing before you order:

• Bolt-on installation into stock mounting locations — no extra drilling
• No driveshaft or brake line replacement required — Mopar additionally specifies no electrical wire harness modification on the Fox-equipped kits
• Compatible with electronic stability control — though Mopar specifies that unique alignment specifications are required

Kit Part Numbers by Vehicle and Powertrain

Vehicle	Powertrain	Bilstein Kit	Fox Kit
Wrangler JL 2-Door	2.0L	77072397AI	77072397AF
Wrangler JL 2-Door	3.6L	77072396AH	77072396AF
Wrangler JL 4-Door	2.0L	—	77072430AG
Wrangler JL 4-Door	3.6L	77072395AH	77072395AG
Wrangler JL 4-Door	3.0L EcoDiesel or 392 6.4L V8	77072399AH	77072399AG
Wrangler JL 4xe 4-Door	2.0L PHEV	77072522AE	77072522AD
Gladiator	3.6L	77072468AF	77072468AE
Gladiator	3.0L EcoDiesel	77072469AF	77072469AE
Ram 1500 (2019–2026)	5.7L, Crew Cab only	77072424AE
JPP Steering Damper	Sold separately	77073006AA	77072360AC

Mopar advances the revision suffix on these part numbers periodically — 77072397AI supersedes 77072397AH, for example. The parts counter cross-references superseded numbers automatically, and the VIN is what ultimately determines the correct kit.

What’s in the Kit

Jeep kits ship in a reusable Jeep-branded wooden crate and include:

• Coil springs — tuned to the specific vehicle and powertrain, which is why the catalog splits by engine. A Wrangler carrying a V8 does not get the same spring as one carrying the four-cylinder.
• Front lower control arms — longer, to optimize suspension caster and turning. This is what keeps steering feel predictable after the lift rather than vague.
• Supporting suspension hardware and all necessary mounting hardware

The Ram 1500 kit is a different architecture: front shocks, upper control arms, rear shocks, spring spacers, jounce spacers, and a track bar bracket.

Tire Clearance by Flare Type

Flare	Found On	Maximum Tire
Standard flares	Sport, Sahara	35 inches
Rubicon or High Top flares	Rubicon, or added to any trim	37 inches

Clearance follows the flare, not the trim badge — a Sport wearing High Top flares changes the answer.

Ram 1500 Fitment Restrictions

The 77072424AE kit carries three published restrictions, and all three are absolute:

• Crew Cab configurations only
• 5.7L engine only
• Not compatible with Rebel trim levels, and not compatible with trucks equipped with air suspension (sales code SER)

If you’re driving a Rebel or an air-suspension truck, this kit is not your kit. Mopar requires a VIN to complete the order specifically so this gets caught before anything ships.

Mopar Bed Covers for Ram 1500

Bed covers are where fitment goes wrong most often, because the answer depends on three variables at once: bed length, whether the truck has RamBox, and which tailgate it left the factory with.

Tonneau Lineup by Bed Configuration

Cover Type	5’7″ Conventional	5’7″ with RamBox	6’4″ Conventional
Hard Folding	82215227AF	82215225AF	82215224AF
Soft Tri-Fold	82215863AC	82215862AA	82215864AC
Soft Roll-Up	82215254AB	82215253AB	82215255AB

Part numbers above are cataloged for the Ram 1500 (DT). Cataloged model-year coverage varies by individual part number, and the conventional-bed and RamBox versions are genuinely different parts — not interchangeable. Ram 1500 Classic, 2500, and 3500 use a separate set. Confirm by VIN before ordering.

How the Three Types Differ

Type	Construction	Security	Bed Access
Hard Folding	Rigid panels, high-strength aluminum frame, advanced sealing; made in the U.S.A.	Hidden quick-release latches auto-lock when shut — lock the tailgate and the bed is secured	Drive with it fully closed, partially closed, or fully open
Soft Tri-Fold	Premium fabric resistant to water, mold, mildew, UV, dirt, and dust; sturdy sub-frame and clamping system	Conceals cargo; one-piece seamless cover	Folds in three sections for partial or full access
Soft Roll-Up	Top-mount with pre-set tension controls, straight cross tubes, side dual-paddle latches; made in the U.S.A.	Conceals cargo	Rolls up for full bed access; one-side operation

Two Restrictions That Rule Covers Out

• Multi-function Tailgate (sales code MWK) — Mopar publishes this restriction on all four conventional-bed covers: hard folding 82215227AF and 82215224AF, and soft tri-fold 82215863AC and 82215864AC. If your Ram has the split-swing tailgate, those four are off the list. The RamBox versions (82215225AF and 82215862AA) do not carry a published MWK restriction — have the parts counter confirm against your build sheet.
• OE tonneau cover rails (sales code CS7) — trucks already fitted with factory cover rails may require rail replacement before a new cover mounts correctly. Mopar catalogs a Tonneau Cover Rail Kit (DTRAILKIT) for exactly this conversion. Have the parts counter check your build sheet.

The soft roll-up is a top-mount design that requires no special tools or drilling, and uses pre-set tension controls to hold the cover taut.

Trail Gear: Protection, Recovery, and Lighting

Rock rails, skid plates, winches, and auxiliary lighting are the hardware that turns a capable Jeep into a trail-ready one. Every item below carries a fitment dependency on something else.

Trail Gear by Part Number

Item	Part Number	What It Does	Fitment Dependency
Rock Rails (Gladiator)	82215605AB	Rocker panel and lower body-side protection in heavy-gauge steel; same as production Rubicon rock rails, textured satin black	Not compatible with running boards
Rock Rail Trim Cover (Gladiator)	82216466AA (White)	Gloves over the existing rear rock rail to resist off-road scratches and scuffs	Requires an existing rock rail. Color-specific — Black is 82216467AA, Red is 82216460AA, Sting Grey is 82216468AA
Front Bumper Skid Plate	82215183AB	Shields vital components from rocks, logs, and debris; same as the production Rubicon skid plate	Steel front bumper only — will not fit plastic bumpers
Steel Front Bumper, Three-Piece Full Width	82215121AJ	Full-width steel front bumper with removable end caps	Skid plate 82215183AB is required and sold separately. Dealer programming required for vehicles with halogen fog lamps. 2024-and-later vehicles must also order fog lamp wiring 68087933AA (qty 2)
Steel Front Bumper, Stubby	82215120AE	Short-format steel front bumper for improved approach angle	Skid plate 82215183AB is required and sold separately. Dealer programming required for vehicles with halogen fog lamps. 2024-and-later vehicles must also order fog lamp wiring 68087933AA (qty 2)
JPP Winch	P5160095AC	Waterproof, submersible recovery winch with 100 feet of Warn Spydura synthetic rope; three-stage corrosion finish	Pair with Front Bumper End Caps 82215115AB to maintain equivalent airbag performance
Off-Road LED Light Kit, 7-inch	82215386AC	Two lights at 8,000 actual-output lumens each	Pairs with Mopar Auxiliary Switch Bank Kits. Mopar specifies off-road lights must remain turned off, or covered, on public roadways
Off-Road LED Light Kit, 5-inch	82215385AC	Two lights at 4,800 actual-output lumens each	Pairs with Mopar Auxiliary Switch Bank Kits. Mopar specifies off-road lights must remain turned off, or covered, on public roadways

Three Dependency Chains to Plan Around

Both LED kits use cast aluminum housings that are water submersible and pressure-washer capable, and both are vibration, shock, and EMC tested. Each ships with two lights, protective covers, and a wiring harness with pigtail, ground eyelet, and blunt-cut circuit.

Browse the full catalog through the Mopar Accessories Catalogs or talk to the Parts & Accessories team.

How to Confirm a Mopar Accessory Fits Your Vehicle

Verifying fitment means matching an OEM part number against your vehicle’s 17-digit VIN — not against the model name. Mopar requires a VIN to complete a lift kit order for exactly this reason.

What the VIN Resolves

Variable	What It Decides
Cab configuration	The Ram lift kit is Crew Cab only
Powertrain	Separate lift kit part numbers exist for every engine
Bed length and RamBox	Each combination drives a different tonneau part number
Factory sales codes	Air suspension (SER), Multi-function Tailgate (MWK), and OE cover rails (CS7) each rule out specific parts
Bumper material	Steel versus plastic determines whether the skid plate mounts
Fender flares	Standard versus High Top sets your maximum tire size
Model year	2024-and-later steel bumper installs require additional fog lamp wiring
Existing accessories	Running boards eliminate rock rails

Before You Call

• Have your 17-digit VIN ready
• Know your bed length and whether you have RamBox
• Note any accessories already installed
• Check whether your bumper is steel or plastic

It’s a five-minute conversation that prevents a return.

Mopar Parts Warranty Coverage

Warranty coverage on Mopar parts and accessories is not one number. It changes based on who installs the part.

Coverage by Installer

Who Installs	Term	Parts	Labor
Authorized Chrysler, Dodge, Jeep, Ram, FIAT, or Alfa Romeo dealership	24 months / unlimited miles	Covered	Covered
Professional technician at an automotive service facility (wholesale-purchased parts)	24 months / unlimited miles	Covered	Up to $150.00
Vehicle owner or do-it-yourself (over-the-counter purchase)	24 months / unlimited miles	Parts exchange only	Not covered

Source: FCA US LLC, Mopar Parts & Accessories Limited Warranties. Terms are set by the manufacturer and subject to change.

If Your Vehicle Is Still Under Factory Warranty

A Mopar part installed on a vehicle still covered by the FCA US LLC New Vehicle Basic Limited Warranty is covered for whichever of these is more favorable to you:

• The remainder of the 3-year/36,000-mile New Vehicle Basic Limited Warranty, or
• The Mopar 24-month term measured from the installation date

Does Adding Accessories Void Your Factory Warranty?

This is the question everyone asks, and it’s governed by federal law rather than by dealership policy.

• The Magnuson-Moss Warranty Act (15 U.S.C. §§ 2301–2312) sets the federal framework for consumer product warranties
• Your specific coverage depends on the terms of your own warranty agreement
• Outcomes turn on the facts of the individual situation, not on a blanket rule

Warranty Disclaimer: This information is provided for general educational purposes only and does not constitute legal advice. Warranty coverage depends on the specific terms of your vehicle’s warranty agreement. Consult your owner’s manual or a qualified legal professional for guidance on your individual situation.

Lift Kits Are “Off-Road Only” and Cannot Be Financed With a Vehicle Purchase

FCA US LLC states that Jeep Performance Parts lift kits are aftermarket-only items. Three consequences follow:

• They are designated “Off-Road Only” parts and have not been evaluated or tested for crashworthiness or compliance with safety standards
• They may not be installed by a Chrysler, Dodge, Jeep, or Ram dealer on any vehicle prior to its first retail sale
• They may not be sold or financed in conjunction with the sale of a new vehicle

In plain terms: a lift kit is a separate purchase, made after the vehicle is yours — and it is trail hardware, not a safety-certified upgrade.

Source: FCA US LLC, Jeep Performance Parts Catalog.

After the Lift: Wheel Alignment

Any suspension change alters your vehicle’s alignment, and Mopar explicitly notes that its lift kits require unique alignment specifications.

What Our Alignment Includes

• Visual inspection of your vehicle’s steering and suspension components
• Computer measurement to restore wheel alignment to factory specifications

Signs You Need One

• The vehicle pulls to one side
• The steering wheel sits off-center when driving straight
• Uneven tire wear after a suspension change or larger tires

More detail is available on our tire and wheel service page. You can schedule service online or call the Service Department at 909-675-1927.

Service Disclaimer: The information in this article is general guidance and does not constitute a specific diagnostic or repair recommendation for any individual vehicle. Repair and maintenance decisions should be made in consultation with a certified technician based on the specific condition of your vehicle.

Where Fontana Owners Use This Gear

Fontana sits within reach of real off-highway terrain in the San Bernardino National Forest, which is a large part of why this hardware sells here.

Area	Routes	Character
Lytle Creek Canyon	Stockton Flats (3N06), Upper Lytle Creek Divide (3N31Y), Gobbler’s Knob	Closest OHV access, just north of the city. Stockton Flats is the main route in the north canyon and runs easy to moderate. The Upper Lytle Creek Divide straddles the ridge above the canyon, with San Gabriel Mountains views to the west and Cajon Pass to the east; Gobbler’s Knob sits near the route’s high point, where the Pacific Crest Trail crosses.
Cajon Pass to Silverwood Lake	Cleghorn Ridge OHV Road (2N47)	A 15.2-mile green-sticker route from the Cleghorn off-ramp on Interstate 15 over the ridge to State Highway 138. Rated easy to moderately difficult by the U.S. Forest Service.

Before You Go

• Spark arrester required. California law requires a maintained, working spark arrester on any off-highway vehicle operated on forest, brush, or grass-covered land.
• Pick up OHV maps at the Lytle Creek Ranger Station.
• Check current conditions before heading out, particularly after rain.

Source: U.S. Forest Service, San Bernardino National Forest — Cleghorn Ridge OHV Road 2N47. Route status and requirements are set by the Forest Service and subject to change.

For a fuller breakdown, see our guide to the best off-road trails near Fontana for Jeep Wranglers.

Common Questions About Mopar Off-Road Accessories and Fitment

Can Mopar lift kits be ordered for diesel and V8 Jeeps?

Yes. Mopar catalogs separate 2-inch lift kit part numbers by powertrain, including a kit that covers both the 3.0L EcoDiesel and the 392 6.4L V8 — part 77072399AH for four-door Wrangler JL with Bilstein shocks.

Do Mopar lift kits work with electronic stability control?

Mopar states its lift kits work with electronic stability control, with the qualification that unique alignment specifications are required.

What size tires will a 2-inch Mopar lift clear on a Wrangler?

Up to 35 inches with standard flares, as on Sport or Sahara. Up to 37 inches with Rubicon or High Top flares.

Will the Mopar lift kit fit my Ram 1500 Rebel?

No. The 77072424AE kit is not compatible with Rebel trim levels, and it is not compatible with trucks equipped with air suspension. It is designed for Crew Cab configurations with the 5.7L engine.

Why does Mopar require my VIN to order a lift kit?

Because fitment depends on cab configuration, powertrain, flares, existing accessories, and factory sales codes that a model name doesn’t capture. The VIN resolves all of it before the part ships.

Can I order Mopar performance parts and accessories through the dealership?

Yes. The Parts Department at Fontana Chrysler Dodge Jeep Ram orders genuine Mopar parts and accessories for Chrysler, Dodge, Jeep, and Ram vehicles.

Order Genuine Mopar Parts in Fontana

The Parts Department can source the lift kit, bed cover, or trail hardware that matches your VIN — and flag the fitment conflict before you spend the money.

Fontana Chrysler Dodge Jeep Ram	Details
Address	16263 S Highland Ave, Fontana, CA 92336
Parts	909-675-1656
Service	909-675-1927
Parts Hours	Mon–Fri 7:00 AM–6:00 PM · Sat 8:00 AM–4:00 PM · Sun Closed

Disclaimers

Warranty: This information is provided for general educational purposes only and does not constitute legal advice. Warranty coverage depends on the specific terms of your vehicle’s warranty agreement. Consult your owner’s manual or a qualified legal professional for guidance on your individual situation.

Service/Repair: The information in this article is general guidance and does not constitute a specific diagnostic or repair recommendation for any individual vehicle. Repair and maintenance decisions should be made in consultation with a certified technician based on the specific condition of your vehicle.